Beryllium
MATERIAL OVERVIEW
Characteristics: A hard, brittle, gray-white metal; soluble in acids (except nitric) and alkalies. Resistant to oxidation at ordinary temperatures. High heat capacity and thermal conductivity. It is the lightest structural metal known; can be fabricated by rolling, forging, and machining. Joining is chiefly by shrink-fitting; brazing and welding are difficult. Permeable to x-rays.
Derivation: The ore is converted to the oxide or hydroxide, then to the chloride or fluoride. The halide may be (a) reduced in a furnace by magnesium metal, or (b) reduced by electrolysis. (c) Liquid-liquid extraction with an organophosphate chelating agent can be used as a method of purification, or as an alternative process on the ore itself.
Hazard: Chronic health hazard, especially by inhalation of dust. A known carcinogen. Exposure limits: 0.002 mg/m3 of air.
To view a photo of the item hover over the 
icon.
GENERAL PROPERTIES
|
Symbol: |
Be |
|
Atomic Number: |
4 |
|
Atomic Weight: |
9.01218 |
|
Density: |
1.848 gm/cc |
|
Melting Point: |
1277 oC |
|
Boiling Point: |
2970 oC |
|
Thermal Conductivity: |
2.01 W/cm/K @ 298.2 K |
|
Electrical Resistivity: |
4.0 microhm-cm @ 20 oC |
|
Electronegativity: |
1.5 Paulings |
|
Specific Heat: |
0.436 Cal/g/K @ 25 oC |
|
Heat of Vaporization: |
73.9 K-cal/gm atom at 2467 oC |
|
Heat of Fusion: |
2.8 Cal/gm mole |
TYPICAL ANALYSES - Impurities in ppm
|
Material / Purity: |
2N8 |
| BeO | 1200 |
| Fe | 600 |
| Al | 200 |
| Mg | 25 |
| Si | 100 |
| Cr | 100 |
| Co | 10 |
| Cu | 100 |
| C | 400 |
| Mn | 50 |
| Mo | 50 |
| Ni | 150 |
| Ca | 100 |
| Ag | 10 |
| Ti | 40 |
| Pb | 20 |
BERYLLIUM FOIL
|
Material |
Purity |
| Beryllium Foil .001” | 2N, 2N8 |
| Beryllium Foil .002” | 2N, 2N8 |
| Beryllium Foil .003” | 2N, 2N8 |
| Beryllium Foil .004” | 2N, 2N8 |
| Beryllium Foil .005” | 2N, 2N8 |
| Beryllium Foil .006” | 2N, 2N8 |
| Beryllium Foil .007” | 2N, 2N8 |
| Beryllium Foil .008” | 2N, 2N8 |
| Beryllium Foil .009” | 2N, 2N8 |
Foil is cut to order and sold by the square inch. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.
BERYLLIUM SHEET
|
Material |
Purity |
| Beryllium Sheet .010” |
2N, 2N8 |
| Beryllium Sheet .012" | 2N, 2N8 |
| Beryllium Sheet .015" | 2N, 2N8 |
| Beryllium Sheet .020" | 2N, 2N8 |
| Beryllium Sheet .030" | 2N, 2N8 |
| Beryllium Sheet .040" | 2N, 2N8 |
| Beryllium Sheet .050" | 2N, 2N8 |
Sheet thicknesses are available in increments of .001”. Sheet is cut to order and sold by the square inch. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.
BERYLLIUM POWDER & PIECES
|
Material |
Purity |
Beryllium Pieces 1” by Down   |
2N8, 3N |
| Beryllium Powder-100 Mesh | 2N8, 3N |
| Beryllium Powder-325 Mesh | 2N8, 3N |
Powder and pieces are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.
BERYLLIUM COMPOUNDS
|
Material |
Purity |
Beryllium Nitride Pieces, Be3N2  |
|
| Beryllium Oxide BeO, -325 Mesh |
3N8 |
Compounds are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.
|
|
ALLOYS 
