Molybdenum

Molybdenum Rod

MATERIAL OVERVIEW

Characteristics: Gray metal or black powder. Does not occur free in nature. A necessary trace element in plant nutrition. Insoluble in hydrochloric or hydrofluoric acid, ammonia, sodium hydroxide, or dilute sulfuric acid, soluble in hot concentrated sulfuric acid or nitric acids, but insoluble in water. High strength at very high temperatures. Oxidizes rapidly above 1000°F in air at sea level, but is stable in upper atmosphere. Low toxicity.

Hazards: Flammable in form of dust or powder. Tolerance of Mo compounds (as Mo); insoluble, 10 mg/m3 of air; soluble, 5 mg/m3 of air.

To view a photo of the item hover over the camera_nopreview icon.

GENERAL PROPERTIES

Symbol:

Mo

Atomic Number:

42

Atomic Weight:

95.94

Density:

10.22 gm/cc

Melting Point:

2617 oC

Boiling Point:

4612 oC

Thermal Conductivity:

1.38 W/cm/K @ 298.2 K

Electrical Resistivity:

5.2 microhm-cm @ 0 oC

Electronegativity:

1.9 Paulings

Specific Heat:

0.0599 Cal/g/K @ 25 oC

Heat of Vaporization:

128 K-Cal/gm atom at 4612 oC

Heat of Fusion:

6.6 Cal/gm mole

Modulus of Elasticity:

32 x 1010 Pa @ 25 oC

Thermal Coefficient of Expansion:

5 x 10-6 cm/cm @ 25 oC

Electrical Conductivity:

34% I.A.C.S.

 

MOLYBDENUM VIDEO CLIPS

 
 
 
molybdenum metal
 
 
 
 
 
 
 
 
 
 
Click the camera icon to view:
 
 
 
Molybdenum Metal

 

TYPICAL ANALYSES - Impurities in ppm

Material / Purity:

3N8

K <30
Cr <20
Cu <10
Fe <50
Ni <50

MOLYBDENUM WIRE

Material

Purity

Molybdenum Wire .001”
3N8
Molybdenum Wire .002" 3N8
Molybdenum Wire .003" 3N8
Molybdenum Wire .003" 3N8
Molybdenum Wire .004" 3N8
Molybdenum Wire .005" 3N8
Molybdenum Wire .006" 3N8
Molybdenum Wire .007" 3N8
Molybdenum Wire .008" 3N8
Molybdenum Wire .009" 3N8
Molybdenum Wire .010" 3N8
Molybdenum Wire .012" 3N8
Molybdenum Wire .015" 3N8
Molybdenum Wire .018" 3N8
Molybdenum Wire .020" 3N8
Molybdenum Wire .025" 3N8
Molybdenum Wire .030" 3N8
Molybdenum Wire .034" 3N8
Molybdenum Wire .040" 3N8
Molybdenum Wire .050" 3N8
Molybdenum Wire .060" 3N8
Molybdenum Wire .062" 3N8
Molybdenum Wire .080" 3N8

Wire is spooled to order and sold by the foot or meter. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.

MOLYBDENUM ROD

 

Material

Purity

Molybdenum Rod .0625” 3N8
Molybdenum Rod .125” 3N8
Molybdenum Rod .250” 3N8
Molybdenum Rod .500” 3N8
Molybdenum Rod .625” 3N8
Molybdenum Rod .750” 3N8
Molybdenum Rod 1” 3N8

Rod is cut to order and sold by the inch or foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.

MOLYBDENUM FOIL

Material

Purity

Molybdenum Foil .001” 3N8
Molybdenum Foil .002” 3N8
Molybdenum Foil .003” 3N8
Molybdenum Foil .004” 3N8
Molybdenum Foil .005” 3N8
Molybdenum Foil .006” 3N8
Molybdenum Foil .007” 3N8
Molybdenum Foil .008” 3N8
Molybdenum Foil .009” 3N8

Foil is cut to order and sold by the square inch. Foil thicknesses are available in increments of .001”. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.

MOLYBDENUM SHEET

Material

Purity

Molybdenum Sheet .010”  camera1  camera1  camera1
3N8
Molybdenum Sheet .015" 3N8
Molybdenum Sheet .020" 3N8
Molybdenum Sheet .025" 3N8
Molybdenum Sheet .030"  camera1  camera1  camera1 3N8
Molybdenum Sheet .040" 3N8
Molybdenum Sheet .050" 3N8
Molybdenum Sheet .060" 3N8
Molybdenum Sheet .070" 3N8
Molybdenum Sheet .080" 3N8
Molybdenum Sheet .090" 3N8
Molybdenum Sheet .125" 3N8
Molybdenum Sheet .250" 3N8
Molybdenum Sheet .500 3N8

 Sheet is cut to order and sold by the square inch. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.

MOLYBDENUM SPUTTERING TARGETS

Material

Purity

Molybdenum Sputtering Target  2"D X .125"T 3N8
Molybdenum Sputtering Target 2"D X .250"T 3N8
Molybdenum Sputtering Target 3"D X .125"T 3N8
Molybdenum Sputtering Target 3"D X .250"T 3N8
Molybdenum Sputtering Target 4"D X .125"T 3N8
Molybdenum Sputtering Target 4"D X .250"T 3N8

Additional sizes and sputtering targets produced from Molybdenum compounds are available upon request. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for custom sizes.

MOLYBDENUM POWDER, SHOT, PELLETS, & INGOT

Material

Purity

Molybdenum Pellets .125"D X .125"L 3N8
Molybdenum Pellets .250"D X .250"L 3N8
Molybdenum Ingot 3N8
Molybdenum Powder-100 Mesh 3N8
Molybdenum Powder-325 Mesh 3N8

Powder, shot, pellets, and ingots are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for custom sizes.

MOLYBDENUM COMPOUNDS

Material

Purity

Molybdenum Carbide Mo2C  -325 Mesh 2N5
Molybdenum Carbide MoC  -325 Mesh 2N
Molybdenum Phosphide MoP  -200 Mesh 2N5
Molybdenum Silicide MoSi2  -200  +325 Mesh 2N5
Molybdenum Silicide MoSi2  -325 Mesh 2N5
Molybdenum Sulfide MoS2  1 Micron 2N

Compounds are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional mesh sizes.

 

Material Safety Data Sheet - MSDS
Molybdenum MSDS
Technical Data Sheets
Molybdenum
Molybdenum-Rhenium Alloy
Molybdenum-Machining
Molybdenum Silicide
Understanding Mesh Sizes

Home Page Content Under Periodic Table

ALLOYS

Click on the Alloy to go to the Online Catalog page.

 

Welcome to

ESPI was incorporated in 1950 with a mission to provide a competitive source for high purity metals, metal compounds and alloys. We are a valuable resource for virtually all major universities worldwide, global corporate R&D laboratories, thousands of domestic and international manufacturing companies and all U.S. government research laboratories. ESPI offers unique advantages often unavailable from larger organizations with no minimum order size & all business hour calls are handled by a competent sales representative. Automated answering systems and voice mail are not an option at ESPI.

Located within our fabrication facility is the melting department, forging & shaping areas, and the rod & wire, and sheet & foil departments providing the following manufacturing capabilities:

  • Casting of pure metals and alloys
  • Vacuum arc melting
  • Induction melting
  • Rod and wire drawing/extrusion
  • Sheet, foil and ribbon rolling
  • CNC milling and machining

Tel: 541-488-8311 - Email: sales@espimetals.com - or click the "Live Help/Chat Now" icon, upper right.

 

FORMS

ESPI produces and sells 68 elements and dozens of alloys in various forms for your custom needs. Click on the forms below to be directed to detailed information on manufacturing.

 

 

At We Keep Good Company


Aerospace and Defense
Northrop Grumman, Hewlett Packard, IBM, Lockheed-Martin, Hughes, Boeing, General Dynamics, Aerojet, Litton, General Electric


Medical Instruments & Technology
Cintron, Hologic/Lorad, Varian, Siemens Medical, St Jude Medical, ArthroCare, GE Medical, Harvard Medical School, City of Hope Medical Center, American Medical Systems, Cedars Sinai Medical Center


International
Atomic Energy of Canada, CNRS, European Synchrotron Radiation Facility, INRS, Alberta Research Council, National Research Council of Canada, UNAM, CISRO, CERN


Education
Stanford, UCLA, Harvard, Georgia Institute of Technology, Caltech, Johns Hopkins University, University of Arizonia, Penn State, University of Michigan, Princeton, Yale, University of Wollongong, University of Tokoyo, University of Toronto, Tulane, University of New South Wales, Max-Planck Institute, University of Freiburg


Government Research Labs
JPL, Los Alamos National Lab, Battelle Pacific NW National Lab, US Department of Energy, Argonne National Lab, Brookhaven National Lab, Naval Oceans Systems Center, US Air Force, Lawrence Berkeley National Lab, NASA


Green Energy
Origin Energy Solar, First Solar, Schott Solar, SunPower Corporation, Nanosolar, Inc.