Monel
MATERIAL OVERVIEW
Characteristics: Monel is a high tensile strength nickel-copper alloy that was discovered in 1905. It was found to be highly resistant to atmospheric corrosion, salt water, as well as various acid and alkaline solutions. Alloy 400 can be magnetic depending upon composition and previous work history. Alloy K-500 has added aluminum and titanium for age hardening. It is totally nonmagnetic and spark resistant.
Uses: K-500 is used for gyroscope application and anchor cable aboard minesweepers. It is also used for propeller shafts on a wide variety of vessels and exhibits high fatigue strength in seawater. There is also application in chemical process applications for handling of organic acids, caustic and dry chlorine.
Monel 400 is used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners, and heat exchangers.
To view a photo of the item hover over the 
icon.
GENERAL PROPERTIES
|
Density: |
8.83 (gm/cc) |
|
Melting Point Range: |
2370-2460 oF |
|
Curie Temperature: |
20-50 oF |
|
Modulus of Elasticity |
|
|
Tension |
26.0 |
|
Compression |
26.0 |
|
Torsion |
9.5
|
TYPICAL ANALYSES - Chemical Composition
|
Material / Purity: |
Alloy 400 |
Alloy K-500 |
| Ni | 66.5 | 66.5 |
| Fe | 2.50 | 2.0 |
| Mn | 2.0 | 1.50 |
| Si | .50 | 0.5 |
| Cu | 31.0 | - |
| Al | - | 2.7 |
| S | .024 | .010 |
| Ti | - | 0.5 |
| Cu | - | 30.0 |
MONEL WIRE
|
Material |
Purity |
| Monel Wire .010” |
K500 |
| Monel Wire .020" | K500 |
| Monel Wire .032" | 400 |
Monel Wire .040"  |
400 |
| Monel Wire .072" | 400 |
| Monel Wire .080" | K500 |
| Monel Wire .125" | K500 |
Wire is spooled to order and sold by the foot or meter. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.
MONEL FOIL
|
Material |
Purity |
| Monel Foil .002" | 400 |
| Monel Foil .006" | 400 |
Foil is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.
MONEL SHEET
|
Material |
Purity |
| Monel Sheet .010” | 400, K500 |
| Monel Sheet .032" | 400 |
| Monel Sheet .039" | 400 |
| Monel Sheet .040" | K500 |
| Monel Sheet .050" | 400 |
| Monel Sheet .125" | 400 |
| Monel Sheet .250" | 400, K500 |
Sheet is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.
MONEL POWDER, SHOT, PELLETS, & INGOT
|
Material |
Purity |
| Monel Pellets .125"L X .125"D or .250"D | 400, K500 |
| Monel Pellets .250"L X .250"D | 400, K500 |
Powder, shot, pellets, and ingots are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.
|
|
ALLOYS 
