Neodymium
MATERIAL OVERVIEW
Characteristics: Soft, malleable, grey, yellowish metal. Tarnishes easily. Liberates hydrogen from water, soluble in dilute acids. High electrical resistivity, paramagnetic. Readily cut and machined. Stored under mineral oil or inert gas to prevent tarnish and corrosion.
Hazards: Irritant to eyes and abraded skin (salts).
To view a photo of the item hover over the 
icon.
GENERAL PROPERTIES
|
Symbol: |
Nd |
|
Atomic Number: |
60 |
|
Atomic Weight: |
144.24 |
|
Density: |
6.80-7.007 gm/cc |
|
Melting Point: |
1021 oC |
|
Boiling Point: |
3068 oC |
|
Thermal Conductivity: |
0.165 W/cm/K @ 298.2 K |
|
Electrical Resistivity: |
64.0 microhm-cm @ 25 oC |
|
Electronegativity: |
1.2 Paulings |
|
Specific Heat: |
Specific Heat: 0.049 Cal/g/K @ 25 oC |
|
Heat of Vaporization: |
69 K-Cal/gm atom at 3068 oC |
|
Heat of Fusion: |
1.70 Cal/gm mole |
|
Thermal Neutron Cross Section: |
46 Barns per Atom |
|
Magnetic Susceptibility: |
3460x10-6 Emu @ Room Temp |
|
Magnetic Moment: |
3.6 Bohr Magnetons |
|
Temperature Coefficient of Resistance: |
0.00164 @ 0 oC to Room Temp
|
TYPICAL ANALYSES - Impurities in ppm
|
Material / Purity: |
3N |
| Pr | 100 |
| Ca | 7 |
| Mg | <1 |
| Ce | 100 |
| Al | 5 |
| La | 100 |
| Sm | 100 |
| Fe | 25 |
| Ta | <0.1 |
| Si | 15 |
| Y | 100 |
NEODYMIUM ROD
|
Material |
Purity |
| Neodymium Rod .250” | 3N |
| Neodymium Rod .500” | 3N |
Rod is cut to order and sold by the inch or foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.
NEODYMIUM FOIL
|
Material |
Purity |
| Neodymium Foil .001” | 3N |
| Neodymium Foil .002” | 3N |
| Neodymium Foil .003” | 3N |
| Neodymium Foil .004” | 3N |
| Neodymium Foil .005” | 3N |
| Neodymium Foil .006” | 3N |
| Neodymium Foil .007” | 3N |
| Neodymium Foil .008” | 3N |
| Neodymium Foil .009” | 3N |
Foil is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.
NEODYMIUM SHEET
|
Material |
Purity |
| Neodymium Sheet .010” |
3N |
| Neodymium Sheet .012" | 3N |
| Neodymium Sheet .020" | 3N |
| Neodymium Sheet .024" | 3N |
| Neodymium Sheet .030" | 3N |
| Neodymium Sheet .050" | 3N |
Sheet is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.
NEODYMIUM SPUTTERING TARGETS
|
Material |
Purity |
| Neodymium Sputtering Target 2"D X .125"T | 3N |
| Neodymium Sputtering Target 2"D X .250"T | 3N |
| Neodymium Sputtering Target 3"D X .125"T | 3N |
| Neodymium Sputtering Target 3"D X .250"T | 3N |
| Neodymium Sputtering Target 4"D X .125"T | 3N |
| Neodymium Sputtering Target 4"D X .250"T | 3N |
Targets are made to order and packaged individually. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters, thicknesses or custom sizes.
NEODYMIUM POWDER & INGOT
|
Material |
Purity |
| Neodymium Pieces | 3N |
| Neodymium Chips or Ingot | 3N |
| Neodymium Powder – 40 Mesh, Under Oil | 3N |
Neodymium Powder – 40 Mesh, Ampoules Under Dry Argon  |
3N |
Neodymium Powder – 40 Mesh, Cans Under Dry Argon   |
3N |
Powder, shot, pellets, pieces, chips and ingots are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.
NEODYMIUM COMPOUNDS
|
Material |
Purity |
| Neodymium Chloride NdCl3-xH2O -60 Mesh | 3N |
| Neodymium Chloride NdCl3 -60 Mesh | 3N |
| Neodymium Fluoride NdF3 Tablets | 3N |
| Neodymium Fluoride NdF3 1/4"-1/8" Pieces | 3N |
| Neodymium Fluoride NdF3 -60 Mesh | 3N |
| Neodymium Fluoride NdF3 -325 Mesh | 3N |
| Neodymium Oxide Nd2O3 -325 Mesh | 3N, 5N |
| Neodymium Oxide Nd2O3 1/2"-1/8" Pieces | 3N |
Compounds are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.
|
|
ALLOYS 
