Palladium

Palladium Shot

MATERIAL OVERVIEW

Characteristics: Silver-white, ductile metal which does not tarnish in air. It is the least noble (most reactive) of the platinum group. Absorbs up to 800 times its own volume of hydrogen. Attacked by hot, concentrated nitric acid and boiling sulfuric acid. Soluble in aqua regia and fused alkalies. Insoluble in organic acids. Good electrical conductor. Nontoxic; noncombustible, except as dust.

To view a photo of the item hover over the camera_nopreview icon.

GENERAL PROPERTIES

Symbol:

Pd

Atomic Number:

46

Atomic Weight:

106.4

Density:

12.02 gm/cc

Melting Point:

1554 oC

Boiling Point:

2970 oC

Thermal Conductivity:

0.718 W/cm/K @ 298.2 K

Electrical Resistivity:

10.54 microhm-cm @ 20 oC

Electronegativity:

2.2 Paulings

Specific Heat:

0.0584 Cal/g/K @ 25 oC

Heat of Vaporization:

90 K-cal/gm atom at 2970 oC

Heat of Fusion:

4.12 Cal/gm mole

TYPICAL ANALYSES - Impurities in ppm

Material / Purity:

3N5

4N5

Ag <50.0 1.0
Al <20.0 -
As <1.0 -
Au <20.0 -
B <5.0 -
Ba <5.0 10.0
Bi <1.0 -
Ca <5.0 1.0
Cd <5.0 -
Co <5.0 -
Cr <15.0 -
Cu <15.0 -
Fe <50.0 1.0
Hg <5.0 -
Ir <50.0 -
K - 10.0
Li - 10.0
Mg <1.0 1.0
Mn <1.0 -
Mo <1.0 -
Na - 1.0
Ni <10.0 -
Os <20.0 -
Pb <5.0 -
Pt <100.0 -
Rh <50.0 -
Ru <1.0 -
Sb <1.0 -
Si <10.0 1.0
Sn <20.0 -
Te <5.0 -
Ti <1.0 -
Zn <10.0 -
Zr <1.0 -

PALLADIUM WIRE

Material

Purity

Palladium Wire .001” 3N5, 4N
Palladium Wire .002" 3N5, 4N
Palladium Wire .003" 3N5, 4N
Palladium Wire .004" 3N5, 4N
Palladium Wire .005" 3N5, 4N
Palladium Wire .006" 3N5, 4N
Palladium Wire .007" 3N5, 4N
Palladium Wire .008"  3N5, 4N
Palladium Wire .009" 3N5, 4N
Palladium Wire .010" 3N5, 4N
Palladium Wire .015" 3N5, 4N
Palladium Wire .020" 3N5, 4N
Palladium Wire .025" 3N5, 4N
Palladium Wire .030" 3N5, 4N
Palladium Wire .040" 3N5, 4N
Palladium Wire .060" 3N5, 4N
Palladium Wire .080"  camera1 3N5, 4N
Palladium Wire .090" 3N5, 4N

Wire is spooled to order and sold by the foot or meter. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.

PALLADIUM ROD

Material

Purity

Palladium Rod .0625” 3N5, 4N
Palladium Rod .125” 3N5, 4N
Palladium Rod .250” 3N5, 4N
Palladium Rod .500” 3N5, 4N
Palladium Rod .625” 3N5, 4N
Palladium Rod .750” 3N5, 4N
Palladium Rod 1” 3N5, 4N

Rod is cut to order and sold by the inch or foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.

PALLADIUM FOIL

Material

Purity

Palladium Foil .001” 3N5, 4N
Palladium Foil .002” 3N5, 4N
Palladium Foil .003” 3N5, 4N
Palladium Foil .004” 3N5, 4N
Palladium Foil .005”  camera1 3N5, 4N
Palladium Foil .006” 3N5, 4N
Palladium Foil .007” 3N5, 4N
Palladium Foil .008” 3N5, 4N
Palladium Foil .009” 3N5, 4N

Foil is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.

PALLADIUM SHEET

Material

Purity

Palladium Sheet .010” 3N, 3N5, 4N
Palladium Sheet .015" 3N5
Palladium Sheet .020" 3N5, 4N
Palladium Sheet .025" 3N5
Palladium Sheet .030" 3N5
Palladium Sheet .035" 3N5
Palladium Sheet .040" 3N5, 4N
Palladium Sheet .050" 3N5
Palladium Sheet .0625" 3N5
Palladium Sheet .080" 3N5

Sheet is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.

PALLADIUM SPUTTERING TARGETS

Material

Purity

Palladium Sputtering Target 2"D X .125"T 3N5, 4N
Palladium Sputtering Target 2"D X .250"T  camera1  camera1 3N5, 4N
Palladium Sputtering Target 3"D X .125"T 3N5, 4N
Palladium Sputtering Target 3"D X .250"T 3N5, 4N
Palladium Sputtering Target 4"D X .125"T 3N5, 4N
Palladium Sputtering Target 4"D X .250"T 3N5, 4N

Targets are made to order and packaged individually. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters, thicknesses or custom sizes.

PALLADIUM POWDER, SHOT, PELLETS, & INGOT

Material Purity
Palladium Shot  camera1 3N5, 4N
Palladium Pellets .125"D X .125"L 3N5, 4N
Palladium Pellets .250"D X .250"L 3N5, 4N
Palladium Ingot 3N5, 4N
Palladium Powder-100 Mesh 3N5, 4N
Palladium Powder-325 Mesh 3N5, 4N

Powder, shot, pellets, and ingots are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.

COMPOUNDS

Material

Purity

Palladium Chloride PdCl2  -325 Mesh 3N5
Palladium Nitrate Pd(NO3)2 3N5
Palladium Oxide PdO  -325 Mesh 3N5
Palladium Oxide Hydrate PdO-325 Mesh 3N5

Compounds are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.

 

Material Safety Data Sheet - MSDS
Palladium MSDS
Technical Data Sheets

Understanding Mesh Sizes

Home Page Content Under Periodic Table

ALLOYS

Click on the Alloy to go to the Online Catalog page.

 

Welcome to

ESPI was incorporated in 1950 with a mission to provide a competitive source for high purity metals, metal compounds and alloys. We are a valuable resource for virtually all major universities worldwide, global corporate R&D laboratories, thousands of domestic and international manufacturing companies and all U.S. government research laboratories. ESPI offers unique advantages often unavailable from larger organizations with no minimum order size & all business hour calls are handled by a competent sales representative. Automated answering systems and voice mail are not an option at ESPI.

Located within our fabrication facility is the melting department, forging & shaping areas, and the rod & wire, and sheet & foil departments providing the following manufacturing capabilities:

  • Casting of pure metals and alloys
  • Vacuum arc melting
  • Induction melting
  • Rod and wire drawing/extrusion
  • Sheet, foil and ribbon rolling
  • CNC milling and machining

Tel: 541-488-8311 - Email: sales@espimetals.com - or click the "Live Help/Chat Now" icon, upper right.

 

FORMS

ESPI produces and sells 68 elements and dozens of alloys in various forms for your custom needs. Click on the forms below to be directed to detailed information on manufacturing.

 

 

At We Keep Good Company


Aerospace and Defense
Northrop Grumman, Hewlett Packard, IBM, Lockheed-Martin, Hughes, Boeing, General Dynamics, Aerojet, Litton, General Electric


Medical Instruments & Technology
Cintron, Hologic/Lorad, Varian, Siemens Medical, St Jude Medical, ArthroCare, GE Medical, Harvard Medical School, City of Hope Medical Center, American Medical Systems, Cedars Sinai Medical Center


International
Atomic Energy of Canada, CNRS, European Synchrotron Radiation Facility, INRS, Alberta Research Council, National Research Council of Canada, UNAM, CISRO, CERN


Education
Stanford, UCLA, Harvard, Georgia Institute of Technology, Caltech, Johns Hopkins University, University of Arizonia, Penn State, University of Michigan, Princeton, Yale, University of Wollongong, University of Tokoyo, University of Toronto, Tulane, University of New South Wales, Max-Planck Institute, University of Freiburg


Government Research Labs
JPL, Los Alamos National Lab, Battelle Pacific NW National Lab, US Department of Energy, Argonne National Lab, Brookhaven National Lab, Naval Oceans Systems Center, US Air Force, Lawrence Berkeley National Lab, NASA


Green Energy
Origin Energy Solar, First Solar, Schott Solar, SunPower Corporation, Nanosolar, Inc.