Zinc

Zinc Sheet

MATERIAL OVERVIEW

Characteristics: Shining white metal with bluish gray luster (called spelter). Not found native. Soluble in acids and alkalies. Insoluble in water. Malleable at 100-150 oC. Strongly electropositive. Zinc foil will ignite in presence of moisture. Low toxicity.

Hazards: Flammable, dangerous fire and explosion risk (dust).

To view a photo of the item hover over the camera_nopreview icon.

GENERAL PROPERTIES

Symbol:

Zn

Atomic Number:

30

Atomic Weight:

65.38

Density:

7.133 gm/cc

Melting Point:

419.58 oC

Boiling Point:

907 oC

Thermal Conductivity:

1.16 W/cm/K @ 298.2 K

Electrical Resistivity:

5.916 microhm-cm @ 20 oC

Electronegativity:

1.6 Paulings

Specific Heat:

0.0928 Cal/g/K @ 25 oC

Heat of Vaporization:

27.4 K-Cal/gm atom at 907 oC

Heat of Fusion:

1.595 Cal/gm mole

 

TYPICAL ANALYSES - Impurities in ppm

Material / Purity:

4N

5N

6N

Ag 8 <1 -
Bi <1 <1 -
Fe 15 <1 0.20
Cd 10 <1 -
Cu 30 <2 0.10
Mg 2 <1 0.30
Pb 30 <3 -
Si 2 - 0.30
Sn 1 - -

ZINC WIRE

Material

Purity

Zinc Wire .005" 3N, 4N, 5N, 6N
Zinc Wire .006" 3N, 4N, 5N, 6N
Zinc Wire .007" 3N, 4N, 5N, 6N
Zinc Wire .008" 3N, 4N, 5N, 6N
Zinc Wire .009" 3N, 4N, 5N, 6N
Zinc Wire .010" 3N, 4N, 5N, 6N
Zinc Wire .015" 3N, 4N, 5N, 6N
Zinc Wire .020" 3N, 4N, 5N, 6N
Zinc Wire .025" 3N, 4N, 5N, 6N
Zinc Wire .030" 3N, 4N, 5N, 6N
Zinc Wire .040" 3N, 4N, 5N, 6N
Zinc Wire .060" 3N, 4N, 5N, 6N
Zinc Wire .080" 3N, 4N, 5N, 6N
Zinc Wire .090" 3N, 4N, 5N, 6N

Wire is spooled to order and sold by the foot or meter. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.

ZINC ROD

Material

Purity

Zinc Rod .0625” 3N, 4N, 5N, 6N
Zinc Rod .125” 3N, 4N, 5N, 6N
Zinc Rod .250”  camera1  camera1
3N, 4N, 5N, 6N
Zinc Rod .500”  camera1  camera1
3N, 4N, 5N, 6N
Zinc Rod .625” 3N,4N, 5N, 6N
Zinc Rod .750” 3N, 4N, 5N, 6N
Zinc Rod 1”  camera1  camera1
3N, 4N, 5N, 6N

Rod is cut to order and sold by the inch or foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters or custom sizes.

ZINC FOIL

Material

Purity

Zinc Foil .001”  camera1  camera1
3N, 4N, 5N
Zinc Foil .002”  camera1  camera1
3N, 4N, 5N
Zinc Foil .003” 3N, 4N, 5N
Zinc Foil .004” 3N, 4N, 5N
Zinc Foil .005”  camera1  camera1
3N, 4N, 5N
Zinc Foil .006” 3N, 4N, 5N
Zinc Foil .007” 3N, 4N, 5N
Zinc Foil .008” 3N, 4N, 5N
Zinc Foil .009” 3N, 4N, 5N

Foil is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.

ZINC SHEET

Material

Purity

Zinc Sheet .010”  camera1  camera1  camera1
3N, 4N, 5N
Zinc Sheet .015"  camera1  camera1  camera1 3N, 4N, 5N
Zinc Sheet .020"  camera1  camera1  camera1 3N. 4N, 5N
Zinc Sheet .030"  camera1  camera1  camera1 3N, 4N, 5N
Zinc Sheet .040"  camera1  camera1  camera1 3N, 4N, 5N

Sheet is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.

ZINC SPUTTERING TARGETS

Material

Purity

Zinc Sputtering Target 2"D X .125"T 3N, 4N, 5N
Zinc Sputtering Target 2"D X .250"T 3N, 4N, 5N
Zinc Sputtering Target  3"D X .125"T 3N, 4N, 5N
Zinc Sputtering Target 3"D X .250"T 3N, 4N, 5N
Zinc Sputtering Target 4"D X .125"T 3N, 4N, 5N
Zinc Sputtering Target 4"D X .250"T 3N, 4N, 5N

Targets are made to order and packaged individually. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional diameters, thicknesses or custom sizes.

ZINC POWDER, SHOT, PELLETS, & INGOT

Material

Purity

Zinc Shot 1-5mm or 1-3mm camera1
5N, 6N
Zinc Ingot 4N, 5N
Zinc Powder -100 3N, 5N, 6N
Zinc Powder -100, +200 Mesh 5N, 6N

Powder, shot, pellets, and ingots are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.

ZINC COMPOUNDS

Material

Purity

Zinc Arsenide Zn3As2  -20 Mesh 2N
Zinc Fluoride ZnF2-xH2O  -4 Mesh 2N
Zinc Oxide ZnO  -325 Mesh 3N, 5N
Zinc Oxide ZnO  Tablets 3N
Zinc Phosphide Zn3P2  -200 Mesh 2N5
Zinc Selenide ZnSe  -325 Mesh 2N, 5N
Zinc Sulfide ZnS  -325 Mesh 3N, 4N
Zinc Telluride ZnTe  -325 Mesh 2N, 5N
Zinc Telluride ZnTe  1/4" to 1/8" Pieces 2N, 5N
Zinc Titanate ZnTiO3  -325 Mesh 3N
Zinc Tungstate ZnWO4  -200 Mesh 3N

Compounds are packaged to order and sold by the gram or kilogram. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional specifications or custom requirements.

 

Material Safety Data Sheet - MSDS
Zinc MSDS
Technical Data Sheets
Zinc
Understanding Mesh Sizes

 

Save

Home Page Content Under Periodic Table

ALLOYS

Click on the Alloy to go to the Online Catalog page.

 

Welcome to

ESPI was incorporated in 1950 with a mission to provide a competitive source for high purity metals, metal compounds and alloys. We are a valuable resource for virtually all major universities worldwide, global corporate R&D laboratories, thousands of domestic and international manufacturing companies and all U.S. government research laboratories. ESPI offers unique advantages often unavailable from larger organizations with no minimum order size & all business hour calls are handled by a competent sales representative. Automated answering systems and voice mail are not an option at ESPI.

Located within our fabrication facility is the melting department, forging & shaping areas, and the rod & wire, and sheet & foil departments providing the following manufacturing capabilities:

  • Casting of pure metals and alloys
  • Vacuum arc melting
  • Induction melting
  • Rod and wire drawing/extrusion
  • Sheet, foil and ribbon rolling
  • CNC milling and machining

Tel: 541-488-8311 - Email: sales@espimetals.com - or click the "Live Help/Chat Now" icon, upper right.

 

FORMS

ESPI produces and sells 68 elements and dozens of alloys in various forms for your custom needs. Click on the forms below to be directed to detailed information on manufacturing.

 

 

At We Keep Good Company


Aerospace and Defense
Northrop Grumman, Hewlett Packard, IBM, Lockheed-Martin, Hughes, Boeing, General Dynamics, Aerojet, Litton, General Electric


Medical Instruments & Technology
Cintron, Hologic/Lorad, Varian, Siemens Medical, St Jude Medical, ArthroCare, GE Medical, Harvard Medical School, City of Hope Medical Center, American Medical Systems, Cedars Sinai Medical Center


International
Atomic Energy of Canada, CNRS, European Synchrotron Radiation Facility, INRS, Alberta Research Council, National Research Council of Canada, UNAM, CISRO, CERN


Education
Stanford, UCLA, Harvard, Georgia Institute of Technology, Caltech, Johns Hopkins University, University of Arizonia, Penn State, University of Michigan, Princeton, Yale, University of Wollongong, University of Tokoyo, University of Toronto, Tulane, University of New South Wales, Max-Planck Institute, University of Freiburg


Government Research Labs
JPL, Los Alamos National Lab, Battelle Pacific NW National Lab, US Department of Energy, Argonne National Lab, Brookhaven National Lab, Naval Oceans Systems Center, US Air Force, Lawrence Berkeley National Lab, NASA


Green Energy
Origin Energy Solar, First Solar, Schott Solar, SunPower Corporation, Nanosolar, Inc.