Hexachloroplatinic Acid

MATERIAL SAFETY DATA SHEET

I. PRODUCT IDENTIFICATION

Manufacturer/Supplier:

ESPI Metals

1050 Benson Way, Ashland, OR 97520

Toll Free (800) 638-2581 * Fax (541) 488-8313

E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Product Name: Hexachloroplatinic Acid IV Hexahydrate

Formula: H₂PtC1₆ x 6H₂O

II. HAZARDOUS INGREDIENTS

Hazardous Components: Hexachloroplatinic Acid IV Hexahydrate

Percent (%): 100

ACGIH/TLV (Units): 0.1 mg/m³ TWA

II. PHYSICAL DATA

Boiling Point: Decomposes

Specific Gravity: 2.431

Solubility in H₂O: Extremely Soluble

Appearance and Odor: Brown-Red Crystals - Odor of HCl

IV. FIRE AND EXPLOSION HAZARDS DATA

Flash Point (Method used): Non-flammable

Autoignition Temperature: None

Flammable Limits: Upper: N/A Lower: N/A

Extinguishing Media: As appropriate to surroundings

Special Fire Fighting Procedures: None

Unusual Fire & Explosion Hazard: Emits toxic fumes of HCl, C1₂.

V. HEALTH HAZARD INFORMATION

Threshold Limit Value: H₂PtC1₆ x H₂O = .1 mg/m³

Effects Of Overexposure: Over exposure may cause asthma, congestion, dermatitis.

EMERGENCY FIRST AID PROCEDURES:

INGESTION: Seek immediate medical attention.

DERMAL: Wash with soap and a large volume of water. Seek medical assistance as necessary, especially if irritation develops or persists.

EYES: Flush with copious amounts of water for at least 15 minutes.

INHALATION: Remove from exposure, seek immediate medical attention.

VI. REACTIVITY DATA

Stability: Stable

Hazardous Polymerization: Will not occur

Hazardous Decomposition Products: NH₄Cl, KCl, H₂SO₄, Organic solvents, KOH, NaOH, Alkali metals, Base Metals.

VII. SPILL OR LEAK PROCEDURES

Steps to Be Taken If Spilled or Released: Sweep up and contain.

Waste Disposal Method: In accordance with Local, State and Federal Waste Disposal Regulations. Ship to precious metal refiner.

VIII. SPECIAL PROTECTION INFORMATION

Respiratory Protection (Specify Type): NIOSH/MSHA approved respirator.

Ventilation: Local exhaust.

Eye Protection: Safety Glasses.

Hand (Glove Type): Rubber

Other Protective Equipment: Normal laboratory wear.

IX. SPECIAL PRECAUTIONS

Other Handling and Storage Conditions:

Store in tightly closed containers.

Very Deliquescent.

Read MSDS before using.

The above information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide. ESPI shall not be held liable for any damage resulting from handling or from contact with the above product.

Prepared by: S. Dierks

Dated: January 1994

Home Page Content Under Periodic Table

ALLOYS

Click on the Alloy to go to the Online Catalog page.

Aluminum Alloys

Indium/Specialty Alloys

Gold Alloys

Silver Alloys

Nickel Alloys

Stainless Steel Alloys

Welcome to

ESPI was incorporated in 1950 with a mission to provide a competitive source for high purity metals, metal compounds and alloys. We are a valuable resource for virtually all major universities worldwide, global corporate R&D laboratories, thousands of domestic and international manufacturing companies and all U.S. government research laboratories. ESPI offers unique advantages often unavailable from larger organizations with no minimum order size & all business hour calls are handled by a competent sales representative. Automated answering systems and voice mail are not an option at ESPI.

Located within our fabrication facility is the melting department, forging & shaping areas, and the rod & wire, and sheet & foil departments providing the following manufacturing capabilities:

Casting of pure metals and alloys
Vacuum arc melting
Induction melting
Rod and wire drawing/extrusion
Sheet, foil and ribbon rolling
CNC milling and machining

Tel: 541-488-8311 - Email: sales@espimetals.com - or click the "Live Help/Chat Now" icon, upper right.

FORMS

ESPI produces and sells 68 elements and dozens of alloys in various forms for your custom needs. Click on the forms below to be directed to detailed information on manufacturing.

Foil and Sheet

Shot, Pellets, Pieces, Chips, Ingot & Powder

Rod and Wire

Sputtering Targets

Fabricated Parts

Decontam

At We Keep Good Company

Aerospace and Defense
Northrop Grumman, Hewlett Packard, IBM, Lockheed-Martin, Hughes, Boeing, General Dynamics, Aerojet, Litton, General Electric

Medical Instruments & Technology
Cintron, Hologic/Lorad, Varian, Siemens Medical, St Jude Medical, ArthroCare, GE Medical, Harvard Medical School, City of Hope Medical Center, American Medical Systems, Cedars Sinai Medical Center

International
Atomic Energy of Canada, CNRS, European Synchrotron Radiation Facility, INRS, Alberta Research Council, National Research Council of Canada, UNAM, CISRO, CERN

Education
Stanford, UCLA, Harvard, Georgia Institute of Technology, Caltech, Johns Hopkins University, University of Arizonia, Penn State, University of Michigan, Princeton, Yale, University of Wollongong, University of Tokoyo, University of Toronto, Tulane, University of New South Wales, Max-Planck Institute, University of Freiburg

Government Research Labs
JPL, Los Alamos National Lab, Battelle Pacific NW National Lab, US Department of Energy, Argonne National Lab, Brookhaven National Lab, Naval Oceans Systems Center, US Air Force, Lawrence Berkeley National Lab, NASA

Green Energy
Origin Energy Solar, First Solar, Schott Solar, SunPower Corporation, Nanosolar, Inc.