Tin Lead Alloy

 

 

SAFETY DATA SHEET

 

 

 

1   PRODUCT AND SUPPLIER IDENTIFICATION

 

Product Name:    Tin-Lead Alloy - foil, pieces, target

Other:                  Tin-Pb

 

Supplier:             ESPI Metals

                            1050 Benson Way

                            Ashland, OR 97520

Telephone:          800-638-2581

Fax:                     541-488-8313

Email:                  This email address is being protected from spambots. You need JavaScript enabled to view it.

Emergency:         Infotrac 800-535-5053 (US) or 352-323-3500 (24 hour)

Recommended Uses:   Scientific Research

 

 

 

2   HAZARDS IDENTIFICATION

 

GHS Classification (29 CFR 1910.1200):   Carcinogenicity, category 2, Reproductive toxicity, category 2.

GHS Label Elements:

Signal Word: Warning

Hazard Statements: H351 Suspected of causing cancer, H361 Suspected of damaging fertility or the unborn child.

Precautionary Statements:   P260 Do not breath dust/fume/gas/mist/vapors/spray, P264 Wash hands thoroughly after handling, P281 Use personal protective equipment as required.

 

 

3   COMPOSITION/INFORMATION ON INGREDIENTS

Ingredient:       CAS#:                %:              EC#:

Tin                      7440-31-5          5-90           231-141-8

Lead                   7439-92-1         10-95           231-100-4

 

 

4   FIRST AID MEASURES

General Measures: Under normal handling and use, exposure to solid forms of this material present few health hazards. Subsequent operations such as grinding, melting or welding may produce hazardous dust or fumes which can be inhaled or come in contact with the skin or eyes. Emergency responders should take care to avoid secondary exposure to lead particulate. Wear appropriate protective equipment.

INHALATION: Remove to fresh air, keep warm and quiet, give oxygen if breathing is difficult. Seek immediate medical attention.

INGESTION: Rinse mouth with water. Do not induce vomiting. Seek immediate medical attention. Never induce vomiting or give anything by mouth to an unconscious person.

SKIN: Remove contaminated clothing, wash affected area with soap and water. Seek medical attention. Wash contaminated clothing before reusing.

EYES: Flush eyes with lukewarm water, including under upper and lower eyelids, for at least 15 minutes. Seek medical attention.

 

Most Important Symptoms/Effects, Acute and Delayed: May cause irritation. See section 11 for more information.

Indication of Immediate Medical Attention and Special Treatment: No other information available.

 

 

5   FIREFIGHTING MEASURES

Extinguishing Media: Use suitable extinguishing agent for surrounding materials and type of fire.

Unsuitable Extinguishing Media: No information available.

 

Specific Hazards Arising from the Material: This product does not present fire or explosion hazards as shipped. Fine dust from processing may ignite if allowed to accumulate and subjected to an ignition source. May emit toxic metal oxide fumes under fire conditions.

Special Protective Equipment and Precautions for Firefighters: Full face, self-contained breathing apparatus and full protective clothing when necessary.

 

 

6   ACCIDENTAL RELEASE MEASURES

Personal Precautions, Protective Equipment, and Emergency Procedures: Wear appropriate respiratory and protective equipment specified in section 8. Avoid creating dusts. Avoid breathing dust or fume. Isolate spill area and provide ventilation.

Methods and Materials for Containment and Cleaning Up: For larger pieces - pick up mechanically. For chips or dust - vacuum using a HEPA filter. Place in properly labeled closed containers. Avoid creating dusts. Do not use compressed air.

Environmental Precautions: Do not allow to enter drains or to be released to the environment.

 

 

7   HANDLING AND STORAGE

Precautions for Safe Handling: Handle in a well-ventilated area. Avoid creating dust. Avoid exposure to high temperature. Avoid breathing dust or fumes. Avoid contact with skin and eyes. Wash thoroughly before eating or smoking. See section 8 for information on personal protection equipment.

Conditions for Safe Storage, Including Any Incompatibilities: Store in a sealed container. Store in a cool, dry area. Protect from moisture. Do not store together with strong oxidizers or acids. See section 10 for more information on incompatible materials.

 

 

8   EXPOSURE CONTROLS AND PERSONAL PROTECTION

Exposure Limits:   OSHA/PEL:        ACGIH/TLV:

Tin                          2 mg/m3             2 mg/m3

Lead                       50 µg/m3             0.05 mg/m3

Appropriate Engineering Controls: Whenever possible the use of local exhaust ventilation or other engineering controls is the preferred method of controlling exposure to airborne dust and fume to meet established occupational exposure limits. Use good housekeeping and sanitation practices. Do not use tobacco or food in work area. Wash thoroughly before eating or smoking. Do not blow dust off clothing or skin with compressed air. Clothing worn in areas of exposure to lead dust or fume should be restricted to the workplace and laundered regularly.

 

Individual Protection Measures, Such as Personal Protective Equipment:

Respiratory Protection: When potential exposures are above the occupational limits, approved respirators must be used.

Eye Protection: Safety glasses

Skin Protection: Wear impermeable gloves, protective work clothing as necessary.

 

 

9   PHYSICAL AND CHEMICAL PROPERTIES

Appearance:

Form:                    Solid in various forms

Color:                    Silvery metallic

Odor:                     Odorless

Odor Threshold:    Not determined

pH:                                             N/A

Melting Point:                            No data

Boiling Point:                             No data 

Flash Point:                               N/A

Evaporation Rate:                     N/A

Flammability:                            No data

Upper Flammable Limit:            No data

Lower Flammable Limit:            No data

 

Vapor Pressure:                         No data

Vapor Density:                           N/A

Relative Density (Specific Gravity):     No data

 

Solubility in H2O:                         Insoluble

Partition Coefficient (n-octanol/water):   Not determined

 

Autoignition Temperature:         No data

Decomposition Temperature:     No data

Viscosity:                                     N/A

 

 

10   STABILITY AND REACTIVITY

Reactivity: No data

Chemical Stability: Stable under recommended storage conditions.

Possibility of Hazardous Reactions: No data

Conditions to Avoid: Avoid creating or accumulating fines or dusts. Avoid high temperatures.

 

Incompatible Materials: Strong acids, strong oxidizers, halogens and interhalogen compounds.

Hazardous Decomposition Products: Lead oxide fume.

 

 

11   TOXICOLOGICAL INFORMATION

Likely Routes of Exposure: Inhalation, skin, eyes. Product as shipped does not present an inhalation hazard; however subsequent operations may create dusts or fumes which could be inhaled.

Symptoms of Exposure: Skin or eye contact with dust or fume may cause local irritation. Inhalation of dust or fumes may cause headache, nausea, vomiting, abdominal spasms, fatigue, sleep disturbances, weight loss, anemia, and pain in legs, arms, and joints. An acute short-term dose of lead could cause acute encephalopathy with seizures, coma, and death. However, short-term exposure of this magnitude is rare. Kidney damage, as well as anemia, can occur from acute exposure. Symptoms due to ingestion of lead dust or fume would be similar to those from inhalation. Other health effects such as metallic taste in the mouth and constipation or bloody diarrhea might also be expected to occur.

 

Acute and Chronic Effects:

Tin: Elemental tin is considered to have low toxicity. Ingestion of food contaminated with tin may cause transient gastrointestinal disturbances such as nausea, vomiting, diarrhea, fever and headache. Inhalation of tin as dust or fumes may cause a benign pneumoconiosis in exposed workers.

Lead: Lead accumulates in bone and body organs once it enters the body. Elimination from the body is slow. Initial and periodic medical examinations are advised for persons repeatedly exposed to levels above the recommended exposure limits of lead dust or fumes. Once lead enters the body, it can affect a variety of organ systems, including the nervous system, kidneys, reproductive system, blood formation, and gastrointestinal system.

Acute Toxicity: No data

Carcinogenicity: Lead: NTP: R - Reasonably anticipated to be a carcinogen   IARC: 2B - Possibly carcinogenic to humans

To the best of our knowledge the chemical, physical and toxicological characteristics of the substance are not fully known.

 

 

12   ECOLOGICAL INFORMATION

Ecotoxicity: No data

Persistence and Degradability: No data

Bioaccumulative Potential: No data

Mobility in Soil: No data

Other Adverse Effects: Do not allow material to be released to the environment. No further relevant information available.

 

 

13   DISPOSAL CONSIDERATIONS

Waste Disposal Method:

Product: Dispose of in accordance with Federal, State and Local regulations.

Packaging: Dispose of in accordance with Federal, State and Local regulations.

 

 

14   TRANSPORT INFORMATION

Shipping Regulations: Not regulated

UN Number:                            N/A

UN Proper Shipping Name:    N/A

Transport Hazard Class:        N/A

Packing Group:                       N/A

Marine Pollutant:                    No

 

 

15   REGULATORY INFORMATION

TSCA Listed: All components are listed.

Regulation (EC) No 1272/2008 (CLP): Carcinogenicity, category 2, Reproductive toxicity, category 2.

Canada WHMIS Classification (CPR, SOR/88-66): Class D, Division 2, Subdivision A - Very toxic material causing other toxic effects.

HMIS Ratings: Health: 1     Flammability: 0     Physical: 0

NFPA Ratings: Health: 1     Flammability: 0     Reactivity: 0

Chemical Safety Assessment: A chemical safety assessment has not been carried out.

 

 

16   OTHER INFORMATION

The information contained in this document is based on the state of our knowledge at the time of publication and is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide. ESPI Metals makes no representation, warranty, or guarantee of any kind with respect to the information contained in this document or any use of the product based on this information. ESPI Metals shall not be held liable for any damages resulting from handling or from contact with the above product. Users should satisfy themselves that they have all current data relevant to their particular use.

 

Prepared by:             ESPI Metals

Revised/Reviewed:   December 2014