Silver Sheet
MATERIAL OVERVIEW
ESPI provides silver sheet and foil, mostly for research and industrial applications, and are manufactured by hot or cold rolling through industrial roll mills. The rolling process involves incrementally reducing thickness of the material through successive passes between the rollers. ESPI provides silver sheet products usually rolled from .010" and above, up to ½” thick, where silver foil is customarily rolled between .001” to .009” in thicknesses.
HOWEVER, ESPI'S RESPONSIVENESS TO ANY CUSTOMER'S UNIQUE SPECIFICATIONS, ENABLES US TO MANUFACTURE TO NEARLY ANY CUSTOM NEED .
Contact ESPI at 800-638-2581 or via This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses, diameters or custom sizes.
Below please find ESPI's standard offerings of Silver Sheet, as well as links to our other forms of Silver.
Characteristics:
Soft, ductile, lustrous white solid. Highest electrical and thermal conductivity of all metals. Resists oxidation, but tarnishes in air through reaction with atmospheric sulfur compounds. Absorbs oxygen strongly at melting point. Soluble in nitric acid, and alkali cyanide solutions, insoluble in water and alkalies. Noncombustible, except as powder.
Hazards: Tolerance (metal) 0.1 mg/m3 of air; (soluble compounds, (as Ag), 0.1 mg/m3 of air)
To view a photo of the item hover over the 
icon.
GENERAL PROPERTIES
|
Symbol: |
Ag |
|
Atomic Number: |
47 |
|
Atomic Weight: |
107.868 |
|
Density: |
10.50 gm/cc |
|
Melting Point: |
961.93 oC |
|
Boiling Point: |
2212 oC |
|
Thermal Conductivity: |
4.29 W/cm/K @ 298.2 K |
|
Electrical Resistivity: |
1.586 microhm-cm @ 20 oC |
|
Electronegativity: |
1.9 Paulings |
|
Specific Heat: |
0.0566 Cal/g/K @ 25 oC |
|
Heat of Vaporization: |
60.7 K-Cal/gm atom at 2212 oC |
|
Heat of Fusion: |
2.70 Cal/gm mole
|
TYPICAL ANALYSES - Impurities in ppm
|
Material / Purity: |
3N5 |
4N |
5N |
6N |
| Ca | 200 | 40 | - | - |
| Na | <20 | <4 | - | - |
| Pb | <20 | <4 | - | <.20 |
| Si | 75 | 15 | - | - |
| Ni | - | - | - | .10 |
| Fe | 40 | 8 | 2 | <.14 |
| Mg | 50 | 10 | - | - |
| Bi | <20 | <5 | <.2 | - |
| Cu | 45 | 8 | .6 | .19 |
| Pd | - | - | .6 | .46 |
SILVER SHEET
|
Material |
Purity |
| Silver Sheet .010” |
3N5, 4N, 5N |
| Silver Sheet .015' | 4N, 5N |
| Silver Sheet .020" | 3N, 4N, 5N |
| Silver Sheet .030" | 4N, 5N |
| Silver Sheet .031" | 3N5, 5N |
| Silver Sheet .040" | 3N5, 4N, 5N |
| Silver Sheet .060" | 4N, 5N |
| Silver Sheet .0625" | 3N5, 4N, 5N |
| Silver Sheet .080" | 3N5, 4N, 5N |
| Silver Sheet .125" | 3N5, 4N, 5N |
| Silver Sheet .250" | 3N5, 4N, 5N |
| Silver Sheet .375" | 3N5, 4N, 5N |
| Silver Sheet .500" | 3N5, 5N |
- Sheet is cut to order and sold by the square inch or square foot. Call or This email address is being protected from spambots. You need JavaScript enabled to view it. for additional thicknesses or custom sizes.
CUSTOMERS FOR SILVER SHEET HAVE ALSO SHOWN INTEREST IN:
SILVER FOIL
SILVER WIRE
SILVER ROD
SILVER SPUTTERING TARGETS
SILVER POWDER, SHOT, PELLETS, & INGOT
SILVER COMPOUNDS
|
|
ALLOYS 
